Find a Rep

Director of Dexotex Marine
Steve Shroeder, Vice President
steves@cpcmail.net
Cell: 310-722-7842
Office: 310-886-9100

International
Ron Borum, Executive Vice President
ronb@cpcmail.net
Cell: 310-704-5456
Office: 310-886-9100

Eastern Territory
Corey Roadcap
coreyr@cpcmail.net
Cell: 814-599-1840
Office: 908-245-2800

Western Territory
Daniel Watt
danw@cpcmail.net
Cell: 714-421-0954
Office: 310-886-9100

Gulf Territory
Gene Stoltz
genes@stoltzindustrial.com
Cell: 214-505-5127

Request a Quote

Feedback
User Login
Your email:
Password:
Email This Page
Your email:
Your friend’s email:
Add to Materials

N

Name

Action

BC-100 Adhesive

 

(MIL-PRF-3135)

BC-100 Adhesive is a mortar material used for setting and bonding all types of rigid floor and wall tiles. It is typically applied at a 1/16 inch thickness (1.6mm) or greater as required. A specially processed neoprene latex, BC-100 Paste is mixed with BC-100 Powder at the time of application to form a solvent-free adhesive that can be applied to any type of surface. The flexibility imparted by the neoprene latex allows for movement or flexing of the deck or bulkhead that would otherwise cause loss of adhesion from rigid cements. BC-100 Adhesive will not soften with heat nor become brittle when cold and exhibits excellent water resistance and aging properties.

Typical Uses:

  • Ceramic, Quarry, Porcelain Tile
  • Block, Pavers, Stone

Approvals:

-U.S. Dept. of Defense MIL-PRF-21631A
-ANSI 118

Specification Reference:

-Commercial Standard - 181-52 Water Resistant Organic Adhesives for Installation of Clay Tile

 

No solventhazard during application
  • Working properties like cement mortar
  • Bonds to almost any type of firm surface
  • Will not soften with heat
  • Will not become brittle when cold
  • Endures vibration
  • Withstands expansion/contraction caused by temperature changes 
Adhesive Strength in Shear...............CSI 181.52
CS181.52 Requirement

.....After 16 Hour Set                                                                                                                   1/2 lb/sq in.....................................5 psi                                                                                  (0.035 kg/cm2)                             (0.351 kg/cm2)

.....After 7 Day Set                                                                                                                       10 psi (0.703 kg/cm2).....................237 psi (16.66 kg/cm2)

.....After 7 Day Set & 6 Day Water Immersion                                                                            10 psi (0.703 kg/cm2).....................242 psi (17 kg/cm2)

.....After 28 Day Set                                                                                                                     40 psi (2.8 kg/cm2).........................302 psi (21.23 kg/cm2)

Corrosive Effect Steel/Aluminum .......None

Thickness................................................1/16 inch (1.6mm) minimum                                 (Additional thickness as required)

  • Commercial Vessel Specialty Products
  • Cruise Ship Specialty Products
  • Ferry Specialty Products
  • Military Marine Craft Specialty Products
  • Offshore Drilling Rig Specialty Products
  • Working Ship Specialty Products